Snappi Diaper Fasteners - Infant

Fasteners available in a single white for $3.95 or double pack 1 dark blue, 1 light blue or 1 mint green and 1 pink for $7.90.

The Snappi® Diaper Fastener is a safe alternative to diaper pins. It is a SAFE, HYGIENIC and EASY to use fastener that offers a practical and reliable way to fasten a cloth diaper, replacing the diaper pin. Snappis come in a variety of colors and is made from a stretchable non-toxic material, which is T-shaped with grips on each end. These grips hook into the diaper fabric to ensure a snug fitting diaper with enough natural movement for the baby. Snappi® Diaper Fasteners are now available in a Toddler size to better fit larger babies.

The Snappi® fastener is manufactured from FDA approved raw materials, a polyester based polyurethane which is degradable through hydrolysis and/or micro biological attack. It contains NO latex or any other adulterant, dilutent or modifying polymers. The composition is 100% polyurethane.


It is an easy to use alternative to diaper pins
It is made from non-toxic material
The Snappi stays in place to ensure a comfortable secure fit
The Snappi is safe, economical and affordable
It is easy-to-care-for and can be sterilized in hot water
It is durable and can last as long as six months
It is tried and trusted and cannot hurt your baby in any way
Snappis are available in a wide range of attractive colors
DIRECTIONS FOR USE:
Snappi® fasteners need to be used correctly in order to work effectively.

1. STRETCH the Snappi® fastener before its first use. The stretching triggers the 'memory' of the Snappi® to return to its original size and in so doing, pulls the diaper together to the middle to allow for a snug fit. This is essential for the Snappi® to work properly. This can be done by holding the Snappi® in the center with one hand and close to the end of the leg (not by the rings) with the other hand and s-t-r-e-t-c-h a few times (10 or so). As you do this you should feel how the material 'softens' or gets more elastic. Follow this stretching procedure with each leg. The Snappi® is then ready to go!

2. Make sure that your Snappi® is ATTACHED SECURELY. It is important that the Snappi' be stretched before hooking it into the diaper. So,

Hook Left,
s-t-r-e-t-c-h and hook Right,
s-t-r-e-t-c-h down and hook Center

By following these instructions, the Snappi® should be secure, the diaper will fit snugly and the baby should not be able to undo it. ALWAYS place a cover over the diaper and Snappi® fastener.
*Toddler size available in White only.

***** Snappi has increased its MSRP on the fastener to $3.95 ******